Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

It is important in the maintenance of electronic braking system's safety and efficiency.

Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

The unique car key programming and read pin code function, it is mainly used to disable the lost vehicle keys and program a new replacement key fob.

ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern.

'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. It must need re-learning throttle sensor position after clearing or repair.

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.

This function is applied to set or learn Air/Fuel ratio parameters.

After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.

This function resets the airbag data to clear the airbag collision fault indicator.

Use this function to activate the electronic water pump before venting the cooling system.

This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem.

This function is used to change the system language of the vehicle central control panel.

Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.

ODO reset is to copy, write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage.

This function is used to open or close the automatic start-stop function via setting the hidden function in ECU (provided that the vehicle has a hidden function and supported by hardware).

This function is applied to match the seats with memory function that are replaced and repaired.

In order to reduce power consumption, functions such as limiting vehicle speed, disabling remote keys, etc., may be disabled. Transport mode needs to be deactivated to restore the vehicle to normal.

This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.

Show the detailed description of the Diagnostic Trouble Code (DTCs).

Turns off Check Engine Light (MIL), clears codes and resets monitors.

Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Show the information of continuous data stream from a vehicle in live graphic (waveform) display.