Resets the mileage or driving time to zero after maintenance to turn off the maintenance light.

Initializes the throttle actuator so that the learning value of the ECU returns to the initial state.

Finds the relative zero point position for the car to drive in a straight line as reference for the ECU.

Performs a resetting operation on the monitoring unit of the vehicle battery to clear low battery fault info.

Bleeds the brake system to restore ABS brake sensitivity when the ABS system contains air.

Resets the brake pad sensor line after replacing the brake pads to clear the onboard computer alarm.

Clears Particulate Matter (PM) from the DPF filter through continuous combustion oxidation mode.

Must be performed after replacing the engine ECU, crankshaft position sensor, or crankshaft flywheel.

Disables lost vehicle keys and programs new replacement key fobs to protect the vehicle from theft.

Writes injector actual code or rewrites code in the ECU to the corresponding cylinder injector code.

Cooperates with wireless tire pressure tool to realize TPMS activation, programming, and learning.

Adjusts the body height sensor for level calibration when replacing components in the air suspension system.

Used to initialize the adaptive headlamp system according to ambient light intensity.

Completes the gearbox self-learning process to improve gear shifting quality and response.

Sets sunroof lock off, automatic closure during rain, sliding/tilting sunroof memory, and temperature threshold.

Learns the Exhaust Gas Recirculation (EGR) valve parameters after it is cleaned or replaced.

Resets the airbag data to clear the airbag collision fault indicator in the system.

Deactivates transport mode to restore vehicle features such as remote key and speed limiting to normal.

Applied to set or learn Air/Fuel ratio parameters for stable combustion engine performance.

Used to open or close the automatic start-stop function via setting the hidden function in the ECU.

Resets the catalytic converter learned value stored in the engine ECU after sensor replacement.

Performs reset operations after the diesel exhaust treatment fluid (urea) is replaced or filled up.

Applied to match the passenger memory seats that are replaced, repaired, or recalibrated.

Activates the electronic water pump before venting the cooling system to remove trapped air.

Sets the size parameters of the modified or replaced tire to calculate accurate vehicle speed.

Performs door window matching to recover ECU initial memory and automatic ascend/descend functions.

Changes the system language of the vehicle central control panel to match user preference.